All Closed Loop Systems come standard with Nai-Lock valves, and In-Line Sight Glass.
***Note: Butane(Solvent) not included with systems unless ordered with dropdown menu or separately. Any order with butane WILL NOT SHIP EXPEDITED.
DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well ventilated areas. Check with your local fire marshal for guidance when operating indoors.
Closed Loop Reclamation Extraction System
(Comes with 1 yr. Limited warranty)
Please Read Optional Upgrades Section for Clarification on System Upgrades
DISCLAIMER: BY UPGRADING TO SWAGELOK VALVES YOU ACKNOWLEDGE THAT YOUR ORDER MAY TAKE 3-5 BUSINESS DAYS TO BE FULFILLED AND EXPEDITED SHIPPING MAY NOT BE REFUNDED.
The 2lb closed loop hydrocarbon extraction system performs botanical extraction within a sealed, vacuumed system. Utilizing a top-fill input, solvent washes thru the material column, collecting oils as it passes over the material. Oil bearing solvent is collected in the collection base under the material column. Once collected, solvent is distilled and recovered, leaving the oils in the collection base. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent.
•10"x10" Welded Bottom Base
•Assembled 10" extractor lid
3"x36" Material column with reducer & top cap
#30 LP tank
60" High Pressure PTFE Braided SS Hose
10" clamp, (2)3" clamps and a 1.5" clamp with gaskets
Extra of each type of gasket
IF YOU SELECT HIGH PRESSURE CLAMP UPGRADE, you must also select the high pressure option with the other applicable upgrades to receive a system fully outfit with high pressure clamps. Upgrades come standard with single pin clamps.
• System Valves: Upgrades our Standard valves to High Quality USA Made SSP Instrumental or Swagelok fully encapsulated mini ball valves
• Base: Choose from our various collection bases. Standard base is a 10x10 welded bottom. The splatter platter replaces the 10x10 base with a 10” splatter and 10”x10” open spool. The jacketed base and platter has a closed jacket welded to the outside. This is used with a circulatory pump and a heater to keep consistent temperatures during recovery.
• Recovery Tank: This upgrade changes the standard #30 LP tank with either: Dual Recovery adds another valve on extractor lid, extra hose, and an extra recovery tank. The dual recovery allows user to recover to two LP tanks, cutting recovery times significantly. #30 Stainless Steel LP or a #25 Jacketed Stainless Steel Tank w/ Internal Condensing Coils.
• Hemispherical Lid: This upgrade replaces the standard flat collection base lid with our hemispherical model. Hemi lids add extra headspace and allow a better view of the center dip-tube and collection base. The hemispherical lid has (2)1/4” FNPT and (2)1/2” FNPT ports, (2)2” triclamp ports for sight glasses and a 1.5” triclamp port for the center.
• Dewaxing Column: This upgrade replaces the standard 3”x36” spool with its sleeved counterpart. The sleeve is packed with dry ice to freeze the material, stopping the waxes and lipids from being extracted.
• Ball Valve: Adds a 1.5" inline ball valve, clamp and gasket. This is HIGHLY recommended to be paired with dewaxing columns
• Inline Sight Glass: Adds a 1.5" Inline Pipe sight glass. This is used to see solvent drop from the material column into the collection base.
• High Pressure Clamps: Replaces standard clamps with the high pressure variants. **Note**This upgrade only applies to clamps on base unit. If other upgrades are selected, you must selected the high pressure option for that upgrade.
• Quick Disconnects: Replaces JIC fittings with a quick release option by either SSP or Parker.
• Active Upgrade Kits: Adds your choice of Active Recovery Kit which is used to speed up the recovery process, or the Active Recirculation/Recovery Kit which allows you to recirculate solvent back thru the material column, then also speeds up recovery.
• 3"x 36" 304 Stainless Steel Material Tube 2lb (900g)
•316 Stainless Steel Fully Encapsulated Miniature Ball Valves
• System Rated to 150PSI
• Multiple port connections for _" 316 Stainless JIC 37 Degree
• 304 Stainless Steel Base Container 10" diameter by 10" tall
• Tri-Clamps at all interfaces make for a high pressure, easy clean unit.
• Viton Gaskets are designed for Oil Processing Temp range -40-200F
• Dimensions (Inches): 55" x 10" Diameter overall size
• Weight: 38 lbs.
• Operating Temperature Range: -40F to 160F
• Ultimate Vacuum: as low as 10 Microns
• Base unit Maximum Capacity: 785 cubic inches, (12.8704 Liters)
• Construction: All components made of 304 Stainless Steel.
• Max Vacuum -29.9inHg
• High Polish Interior